Chillers

FerroCool®

FCP60024WJP

Specification

Model FCP60024WJP
Cooling method Thermoelectric device (Thrmo-module)
Radiating method Forced water cooling
Control method Cooling/Heatng automatic shift PID control
Circulating Fluid System Ambient temperature/humidity 10~35℃, 35~80%RH
Circulating fluid DI Water
Operating temperature range 10.0~60.0℃
Cooling capacity 600W (25℃) ※1
Heating capacity 900W (25℃) ※1
Temperature stability ±0.05℃ ※2
Pump Magnetic drive pump 19L/min, 20m lift
Tank capacity Approx. 3.0L
Port size IN/OUT Rc3/8
Drain Rc3/8 (with plug)
Wetted parts material Stainless steel 304, EPDM, PE, ABS
Facility water system Temperature range 10-35℃
Pressure range ≦1MPa
Required flow rate 7-15L/min
Port size S-IN/S-OUT Rc3/8
Watted parts material Aluminum, Stainless steel 304, EPDM, PE
Electrical System Power supply Single-phase 100 to 240VAC±10%, 50/60Hz
Overcurrent protector 13.5A
Current consumption 7.5A (100V)~3.2A (240V)
Communications I/O, ETH, RS232, RS485
Weight Approx21.5kg
Accessories Power cable
Safety standards EN60204-1 CE marking

※ 1 Ambient temperature 25℃,Facility water temperature 25℃,Set temperature 25℃,Circulating 7L/min

※ 2 Value under stable load without turbulence